As a communication tool that is always carried by the HP owners are very vulnerable to damage. Especially if we look more carefully, hp was composed of hundreds of small-sized electronic components are mounted on a circuit board (PCB) in layers. This certainly emphasizes the fact that HP is damaged, it is not uncommon.
Of the many phones factors that can cause damage, we selected three main causes of damage from broken hp. Cause the first is the HP dropped (hard impact), the second is the HP wet / dirt, while the third cause is damage to the software. For more details, we will discuss one by one cause of defective hp above.
When HP falls, collisions that can result in physically separated components, the connecting lines between components is lost, broken or cracked parts, connections etc regardless of tin than component. This of course resulted in damage to HP. Symptoms of HP damage caused when HP falls varies greatly, depending on the location path / damaged components. HP repair process damaged in a fall, starting with visually inspect whether there is a loose / broken. Followed by improving the connection lead of the component (warming up in tin tin tin connector components with the aim of the crack to melt and blend again after drying.
When HP wet / dirt, electrical circuit that is in the HP would be a mess. The reason, water / dirt has an innate nature is able to conduct electricity. When the water / dirt on the circuit board, all the affected areas will be connected to each other, it is often called a short circuit occurs (short-circuit) on the circuit. This led to the division of power into a mess hp was so damaged. HP damage caused by water or dirt, must be cleaned and dried first. If HP still broken, the circuit needs to be measured is still a short-circuit.
For software damage usually occurs because the memory in your HP is too full so disrupt the performance of the overall software. HP faulty software program needs to be recharged
No comments:
Post a Comment